International Trucks Australia Ltd

International is synonymous with heavy industry in Australia since more than one century, since the manufacturer of farm equipment International Harvester Company began his manufacture locally in 1903.

The factory of Dandenong of International Harvester Truck was brought into service in 1952 and always remained in activity since, producing a broad range of vehicles for the Australien market by including legendary ACCO.

International Harvester becomes International trucks in 1989 which, after its repurchase by the Italian group FIAT - Iveco, becomes Iveco International Trucks in 1992. In 2001, the company is famous Iveco Trucks Australia , widening the range of the trucks built in the factory of Dandenong with models like Iveco Eurotech, EuroStar and more recently Stralis, Trakker and Powerstar.

Since the beginning of 2004, the International trucks are again produced in Dandenongles 9200i and 9200i. These trucks were previously imported the USA of International trucks and Engine Corporation in North America and were transformed locally for control on the right.

In 2007, more modern trucks International 7600 are imported in CKD, are adapted and assembled in the factory of Dandenong to answer at the requests of the Australian market.

In Australia, IVECO manufactures and distributes its very broad range of light, average and heavy trucks for all types of road transport.

IVECO was one of the most active companies of the local market of the truck since 1992. Iveco was the first manufacturer in Australia has to be driven his models by engines turbocompressés in the light range and the vans.

The famous Iveco Daily Turbo was followed heavy ranges EuroStar and EuroTech which was produced in the factory of Dandenong and was adapted to the local conditions.

Current range IVECO includes:

  • the range Daily - light vehicles identical to the European range, vans and frame-cabin,
  • the average range Eurocargo equipped with the famous engines Iveco Tector, includes the models:
    • ML100 E21 PTC 10400 to 16000
    • ML120 E24 & E28 - 12000 to 24000
    • ML150 E24 & E28 - 14300 to 28000
    • ML160 E28 - 15990 to 28000
    • ML180 E28 - 16000 to 32500
    • ML225 E28 - 22500
    • ML230 E28 - 23000 to 32500
  • the heavy average range Acco been driven by Cummins engines, built since 1972, it adopts an old cabin Iveco Eurotech.
  • the range Stralis , heavy extra truck of point with cabin over engine, identical to the model European but approved for a PTR of 90 tons and roads trains of 25 m,
  • the PowerStar , specific model which is also assembled in Brazil but which is the heavy extra truck more advances technologically on sale in Australia, been driven by engines Iveco Cursor of 550 cv, they are approved for a PTR of 90t and road trains of 25m.

The factory of IVECO of Dandenong involves an important investment in the local industry of the truck because the manpower employed by IVECO exceeds the 600 paid ones, without counting induced employment.

Buses IVECO Australia

The Iveco range also includes a particular range bus:

  • Daily - Mini bus - the range Iveco Daily includes/understands the versions drunk school, the urban version and the versions luxates tourism. With a 7 meters length, and a capacity of 17 seats, Daily is been driven by a powerful engine Iveco unijet HPT of 3.0 liters with turbocompressor with variable geometry it develops 166HP. Daily is equipped in series with a pneumatic suspension to improve comfort of the passengers.
  • Subway - City drunk - urban Bus with the flattened floor and the weight reduced thanks to the use of light alloys. This allows a maximum transport capacity, to 86 passengers.
  • Drunk line and school bus service - Iveco provides frames been driven by engines back. Range IVECO is composed of 4 frames: Euromidi , Midirider , Eurorider all equipped with the engines Iveco Tector or Cursor. The frame Delta receiving a Cummins engine.

The motorizations Cursor Euro 5

  • CURSOR 8-355 - 261 kw (355hp) with 2400 tpm - 1280 Nm with 1080-1950tpm

  • CURSOR 10-405 - 298 kw (405hp) with 2100 tpm - 1900 Nm with 1050-1500tpm
  • CURSOR 10-435 - 320 kw (435hp) with 2100 tpm - 1900 Nm with 1050-1610tpm
  • CURSOR 13-485 - 357 kw (485hp) at 1900 tpm - 2200 Nm with 1000-1550tpm
  • CURSOR 13-505 - 367 kw (505hp) at 1900 tpm - 2300 Nm with 1000-1545tpm
  • CURSOR 13-550 - 405 kw (550hp) at 1900 tpm - 2350 Nm with 1000-1650tpm

Random links:Everhart-Thornley detector | Round of applause Chao | Rearrangement of Bamberger | Luigi Pareyson | Sainte-Marie (river) | Menippeah