CESTI Supméca

The Institute of higher learning of Mechanics of Paris - Supméca (in the past CESTI) is a French school of engineers general practitioner with dominant mechanics recruiting mainly after the preparatory cycle (CPGE). It is member of the grouping of schools ENSI and belonged to the network Polyméca.

Its sites are:

  • Supméca Paris: 3 rue Fernand Hainaut - 93407 Saint-Ouen Cedex France
  • Supméca Toulon: Place Georges Pompidou Quartier Mayol - 83000 Toulon

SUPMECA

The ISMEP (Institute of higher learning of Mechanics of Paris), created in 1948 on the initiative joint of the Federation of the Mechanical engineering industries and the Minister of education Main road, is a public corporation of higher education and research.

Since 1956 at Paris and 1994 in Toulon, the ISMEP delivers the diploma for the occupation of engineer Supméca (called before 2003 diploma for the occupation of engineer CESTI)

The principal admission with the ISMEP intervenes on the level bac+2, by the way of the Polytechnic Common Contests.

The training of engineer Supméca combines a solid bases scientific with an industrial experiment. Over three years of formation, 52 weeks are devoted to the training courses. The formation includes/understands obligatory and elective scientific lesson, lesson in economic scenes, social and human, like two obligatory foreign languages of which English, in first and second years, of the lesson of die, in last year.

The students can choose one of the following dies:

  1. Materials and Procédés (MP).
  2. Mécatronique (Mecatro). Industrial
  3. Automated systems and Processus (SP in the past SAPI). Mechanical
  4. Structures and Ensembles (SEM).

Each one of these dies proposes a parallel course. The last year can be also carried out in a partner establishment or not network Polyméca (ENSMA, ENSMM, ENSIAME) like abroad.

Die MP

Objectives

To train engineers ready to associate in a mechanical total step and materials.

Axes of Formation

  1. thorough Knowledge of materials and control of their implementation.
  2. Characterization and behavior under mechanical, thermal or environmental requests.
  3. reasoned Choice and optimized use of materials.

  • parallel Course

Supméca has a double course with the Université Pierre-and-Marie-Curie (Paris VI-Jussieu). Both Masters <>proposés are:
  1. Mechanical of the Fluids and Energy (MFE)
  2. Mechanical and Engineering of the Systems (PUT)

Mecatro die

  • Industrial Systems, Mécatronique
  • Systems Meca-Infotroniques

Objectives

To train engineers general practitioners able to analyze and conceive Mécatroniques systems, by controlling the various tools and techniques used in integration with the mechanical engineering of data processing, electronics and the automatism.

Axes of Formation

  • Dominant Design and manufacture
CAD
  • FAO and computer graphics

    • Dominant production, industrial systems

    order of the systems continuous and/or with discrete events Production
  • Control - automated Information system
  • production

    • Dominant robotics

    data-processing real-time and embarked
  • Electronic of Electronic power
  • of acquisition of the signal and the order
  • collaborative and simultaneous Engineering.

    Die SP

    Objectives

    To train engineers able to develop and exploit automated systems, dedicated to the production or embarked systems, or management systems of the production and supply chain, with the objective to ensure the properties of required safety and quality, and to optimize the transverse performances and flows.

    Axes of Formation

    1. industrial management
    2. engineering of automated systems.
    3. information systems

      • dominant production - automation

    data-processing real-time
  • order of the systems
  • reliability.

      • dominant production - logistics

    MRP and CAM (ERP + solveurs of decision-making aid)
  • Methods of management of flows, stocks (Kanban, Just with times, flows synchronous)
  • Methods of improvement of the productivity of the teams and equipment (5S, visual management, TPM, SMED…)

    • parallel Course

    Die SEM

    Objectives

    To train engineers able to develop, deploy and/or manage computer tools of design and manufacture computer-assisted within the framework of the total life cycle of a mechanical unit, to control in an environment integrated CAD-calculations, the modeling and the simulation of structures.

    Axes of Formation

    1. model of information CFAO, numerical model

    2. integration of the constraints of manufacturing in the process of geometrical design
    3. modeller and analyzes finite elements
    4. non-linear behaviors
    5. dynamic of the structures, vibroacoustic
    6. safety, comfort, integrity of the structures.

    • parallel Course

    See too

    Satellite sight WikiMapia

    External bonds

    • Supméca

    • Supméca - center of Toulon
    • Association of the former students, professors and members of the GAMI

    Random links:PAPOP | Hem-Lenglet | List ambassador plenipotentiaries of the Austrian Netherlands | VFF | Sit of Avaricum | Maintenant_attente_l'année_dernière